05

2026

-

Hydrogen fuel cell explosion-proof plateau climate chamber

Author:


The equipment is equipped with the air discharge pipeline pressure control system of the new energy engine system (the control range is normal pressure ~ 60KPa, the control accuracy is 2KPa, the maximum emission is about 308 g/S (about 924 m/h)), and the hydrogen discharge pipeline pressure control system (the control range is normal pressure ~ 60KPa, the control accuracy is 2KPa, and the maximum emission is about 80 g/min (about 5.3 m/h))).

Main parameters

Equipment size: 5500 × 1938 × 2000mm(D * W * H. Internal volume 22m ³)

Temperature range:-45 ℃ ~ 100 ℃

Pressure range: normal pressure ~ 60kpa

Relative humidity: 30% R.H ~ 65% R.H (temperature: 5 ℃ ~ 50 ℃); At +20 ℃, humidity <30% R.H; At 43 ℃, humidity <50% R.H

Fresh air volume capacity: normal pressure fresh air volume 0~1000m/h, plateau climate simulation fresh air volume 0~800 m/h.

Latest Solution

2026-10-21

Why You Should Never Use Tap Water In A Constant Temperature And Humidity Test Water Tank

When conducting temperature and humidity experiments in a test chamber, the water required is generally supplied by a dedicated water tank. If the water quality is unclean, will it have any impact on the test chamber? What are the standards for the water used in a test chamber? Will it have any impact if ordinary tap water is used?

2026-08-05

Custom Programmable Temperature Impact Test Chamber for Sale

Temperature impact test (temperature impact test of surge water) is to simulate the load situation of surge water generated when the components are driven through the accumulated water, so as to ensure the functional stability of the components under the condition of rapid cooling due to water. If the vehicle is driving on a watery road in winter, ice water splashes onto a hot system/component, the failure mode is mechanical rupture of the material or seal failure due to different temperature expansion coefficients. (This test is not a corrosion test)

2026-08-05

Hydrogen fuel cell explosion-proof plateau climate chamber

The equipment is equipped with the air discharge pipeline pressure control system of the new energy engine system (the control range is normal pressure ~ 60KPa, the control accuracy is 2KPa, the maximum emission is about 308 g/S (about 924 m/h)), and the hydrogen discharge pipeline pressure control system (the control range is normal pressure ~ 60KPa, the control accuracy is 2KPa, and the maximum emission is about 80 g/min (about 5.3 m/h))).

2026-08-05

2021 - 08 Walk-in battery pack test box

The active protection and passive protection of the test chamber have multiple unique protection designs, which can prevent and reduce the leakage, explosion and other accidents that may occur during the development of the battery.

2026-08-05

Walk-in compound salt spray test chamber (stainless steel box)

Walk-in compound salt spray chamber, meeting the requirements of GJB150.11A-2009 military equipment laboratory environmental test methods part 11: salt spray test; GB/T10125-1997 artificial atmosphere corrosion test salt spray test, etc.

2026-08-05

Rapid temperature change three comprehensive test chamber (damp heat, with vertical vibration table)

Heating/cooling rate: (rapidly changing temperature range:-55 ℃ ~ 125 ℃)