05

2026

-

08

Why does the evaporator of a constant temperature and humidity test chamber freeze?

Author:


I.Freezing is caused by excessively low temperatures

The most common reason for the freezing of the evaporator in a constant temperature and humidity test chamber is that the air temperature is too low.When water in the air comes into contact with surfaces below zero degrees,it freezes and forms an ice layer.Therefore,if the air temperature in the constant temperature and humidity test chamber is lower than the condensation point,the surface of its evaporator is prone to icing.

II.Insufficient humidity leads to icing

Another common reason for ice formation in a constant temperature and humidity test chamber is insufficient humidity.If the environmental humidity is too low,water vapor in the air will be lost extremely quickly,which will cause the surface temperature of the evaporator in the constant temperature and humidity test chamber to drop below the condensation point and freeze.In addition,using inappropriate water may also cause the evaporator to freeze,such as water containing high concentrations of hard water and chlorine.

III.Improper maintenance leads to icing

Improper maintenance can also cause the constant temperature and humidity test chamber to freeze.For instance,if the equipment is too dirty and messy,the surface of the evaporator may become uneven due to dust and dirt.In this case,the water film on the surface of the evaporator will become thinner,thereby reducing the surface temperature of the evaporator and making it more prone to freezing.In addition,if the air filter of the evaporator is clogged or the radiator of the evaporator is obstructed,the performance of the equipment may decline and it is also easy to cause the evaporator to freeze.

To solve the problem of ice formation on the evaporator of the constant temperature and humidity test chamber,the following measures can be taken:

1.Ensure that the ambient temperature and humidity are controlled within an appropriate range.

2.Use high quality water and replaced periodically.

3.To regular maintenance of equipment,including clear the surface of the evaporator and replace the air filter.

In conclusion,there are many reasons for the freezing of the evaporator in a constant temperature and humidity test chamber.To avoid such problems,it is necessary to carry out appropriate maintenance on the equipment and ensure the control of environmental temperature and humidity.

Latest News