Non-standard Thermal Shock Chamber
Non-standard Thermal Shock Chamber
Non-standard Thermal Shock Chamber
+
  • Non-standard Thermal Shock Chamber
  • Non-standard Thermal Shock Chamber
  • Non-standard Thermal Shock Chamber

Customized Thermal Shock Chamber | Non-standard Thermal Shock Chamber

Customize extreme temperature variation verification solutions as needed to address the pain points of special testing scenarios.

The Newest non-standard thermal shock chamber is customized in terms of test requirements, inner box dimensions and accessories used. It is available in two-chamber and three-chamber configurations and is an essential testing device for the metal, plastic, rubber, electronic and other material industries. It is used to test the extent to which material structures or composite materials can withstand continuous environments of extremely high and low temperatures in an instant.

The thermal shock test chamber, also known as the thermal shock machine, also the China non-standard thermal shock chamber supplier is suitable for safety performance testing of electronic components, providing reliability tests, product screening tests, etc. At the same time, through tests with this equipment, the reliability of products can be improved and quality control of products can be carried out. The refrigeration cycle of the thermal shock test chamber all adopts the reverse Carnot cycle, which consists of two isothermal processes and two adiabatic processes. The process is as follows: The refrigerant is adiabatically compressed by the compressor to a higher pressure, consuming work and raising the exhaust temperature. Then, the refrigerant undergoes isothermal heat exchange with the surrounding medium through the condenser, transferring heat to the surrounding medium. After passing through the valve, the refrigerant undergoes adiabatic expansion and does work, at which point the temperature of the refrigerant drops. Finally, the refrigerant absorbs heat isothermally from the object at a higher temperature through the evaporator, thereby reducing the temperature of the cooled object. This cycle repeats itself, thus achieving the purpose of cooling down.

 

I.Technical Parameters (Examples of Adjustable Ranges)

Items

Customization range

Internal volume

0.05~10m³

Non-standard test space

The maximum customizable inner cavity is 2m (freely designed in L×W×H ratio).

Customize the temperature zone structure freely

Supports dual-slot, triple-slot, vertical conversion and other modes (conversion time adjustable from 5 to 30 seconds).

Temperature range

-196℃~+300℃

Rate of temperature change

5~100℃/min

Bearing capacity

50kg~5t(Hydraulic lifting optional)

Communication interface

RS-485、RJ-45 Ethernet physical interface (to be purchased together with centralized monitoring software).

1.Production raw materials

(1) Inner tank: SUS316L special stainless steel (acid and alkali resistant/hydrogen embrittlement resistant).

(2) The thermal insulation system, vacuum insulation panel + Nano aerogel composite material (50% lower heat loss).

(3) Core components: modular design (compressor/heater according to the dynamic matching load).

2. Customer base

(1) Special industries: Manufacturers of aerospace rocket fuel valves and deep-sea exploration equipment.

(2) The cutting-edge research: superconducting material lab test center, plant components.

(3) Medical areas: implantable medical devices, biological sample library.

(4) Very large parts: new energy car battery pack, satellite antenna test as a whole.

3. Solutions to industry pain points which one non-standard thermal shock chamber best

(1) The alien artifacts can't into the standard box - volume custom cavity.

(2) The rapid temperature change needs a liquid nitrogen injection technology (>100℃/min).

(3) The corrosive environment test a teflon coating of the tank.

4. Core technology

(1) A distributed temperature control system (independent regional temperature control).

(2) More than physical field coupling simulation technology (prospective validation equipment structure rationality). (3) The ASi - Safe security bus (SIL2 safety level).

II. Six Customized Highlights

1. Size breaks the norm: Supports 10m² super-large cabin (foundation drawing required).

2. Ability to extreme temperature: liquid nitrogen cryogenic - 196 - c to + 300 c flamestrike.

3. Medium adaptive: compatible with gas/liquid/powder sample test environment.

4. Disaster intelligent design: 72 hours after the power to maintain low temperature condition.

5. A cross-platform docking: can access MES/PLM system (OPCUA protocol).

6. The whole life cycle management: provide pressure vessels certification (PED2014/68 / EU).

III. The 7 Most Concerned Issues of Customers

Q1: How long does the customization cycle take?

A1: Standard delivery 45 days, complex structure, 90 days (to provide 3 d design verification process).

Q2: How to ensure the stability of non-standard equipment?

A2: FEA thermodynamic simulation + 72-hour extreme working condition verification was adopted.

Q3: What is the temperature uniformity of the super-large cavity?

A3: Multi-duct matrix technology (±1.5C/2m², 50% better than IEC standards).

Q4: Can products containing volatile substances be tested?

A4: Optional explosion-proof type (ATEX certified/positive pressure ambient gas protection).

Q5: How are operation and maintenance costs controlled?

A5: Modular component design (reducing the cost of replacing a single module by 70%).

Q6: Is on-site renovation supported?

A6: Offer daily equipment upgrade services (with a 40% increase in space utilization.

Q7: What are the legal compliance requirements for custom parameters?

A7: The factory is equipped with CE/UL/PED certifications (configured according to the customer's location).

IV. Three Major Breakthroughs Compared with Standard Models

Functions

Customization equipment

Standard model restrictions

Apace adaptability

Supports L-shaped/U-shaped/multi-layer hanging baskets

Only rectangular cavity

Temperature-variable medium

Free combination of gas, liquid and solid states

Single gas environment

Expansion interface

Reserve over 50 sensor channels

Fixed 8 channels

V. Operating Instructions (Customized Features)

Three-stage control process

1. Scene configuration

(1) Select the sample carrier (mesh basket/liquid tank/rotating stand).

(2) Set the media type (nitrogen/silicone oil/air).

2.Safety Prediction

(1) Automatically calculate the critical value of heat capacity.

(2) The trigger prevent condensation dehumidification (40°C - dew point control).

3. Intelligent Operation and Maintenance

(1) AR remote mentoring maintenance (qr code scanner).

(2) Automatic warning spare parts demand.

▲Special Scene Warning

(1)In confined Spaces shall be forbidden to use liquid nitrogen type equipment.

(2) Explosion-proof type sensor monthly check gas concentration.

(3) Super-large equipment operation need to open the earthquake damping device.

VI. Why Choose Non-standard Customization?

(1) 200 + non-standard project experience: Worked for ITER fusion device custom - 269°C shock chamber.

(2) The whole chain of controllable: The research + 3D printing metal parts workshop temperature control algorithm. (3) Risk guarantee: A performance standard legal agreement notarization) (with a third party.

(4) Global service: 72 hours emergency response team (including polar/offshore platforms).

Submit your test requirements if you buy non-standard thermal shock chamber

↓Get the exclusive simulation solution report↓

(Including energy consumption estimation/site layout /ROI analysis)

Keywords

Further details

 

Team Highlights

Guangzhou Jiaoguang Asia Exhibition

Guangzhou Jiaoguang Asia Exhibition

Guangzhou Jiaoguang Asia Exhibition

Guangzhou Jiaoguang Asia Exhibition

Shanghai Munich Exhibition

Shanghai Munich Exhibition

Company Qualifications

ISO
ISO
Trademark Certificate
CE
Non-standard Thermal Shock Chamber
Non-standard Thermal Shock Chamber
Non-standard Thermal Shock Chamber
+
  • Non-standard Thermal Shock Chamber
  • Non-standard Thermal Shock Chamber
  • Non-standard Thermal Shock Chamber

Non-standard Thermal Shock Chamber

The Newest non-standard thermal shock chamber is customized in terms of test requirements, inner box dimensions and accessories used. It is available in two-chamber and three-chamber configurations and is an essential testing device for the metal, plastic, rubber, electronic and other material industries. It is used to test the extent to which material structures or composite materials can withstand continuous environments of extremely high and low temperatures in an instant.


Leave a Message Online

Note: Please provide your contact information, and our specialists will get in touch with you as soon as possible!

Submit Message