Nonlinear Rapid Temperature Change Test Chamber
Nonlinear Rapid Temperature Change Test Chamber
Nonlinear Rapid Temperature Change Test Chamber
+
  • Nonlinear Rapid Temperature Change Test Chamber
  • Nonlinear Rapid Temperature Change Test Chamber
  • Nonlinear Rapid Temperature Change Test Chamber

The rapid temperature change test chamber is a device used to simulate a rapid temperature change environment. It is widely applied in fields such as electronics, automobiles, aerospace, and materials to test the performance and reliability of products under extreme temperature conditions. The following are its main features and applications:

Main Features:

1.Rapid temperature change rate: It can achieve a temperature change rate ranging from 5℃ to 20°C or even higher per minute.

2.Wide temperature range: usually cover - 70℃ to + 150℃, part of the equipment can reach a wider range.

3.The precise temperature control: adopt advanced temperature control technology, to ensure uniformity of the temperature fluctuation and within + / - 0.5℃.

5.A variety of specifications: provide different size and volume, from small to large equipment of component testing needs.

6.Intelligent operation: equipped with touch screen and programmable controller, support for automatic operation and data records.

 

Buy Discount nonlinear rapid temperature change test chamber is a device used to simulate rapid changes in environmental temperature. Its core feature lies in the fact that the rate of temperature change is not fixed and it presents nonlinear characteristics.

Within a certain period of time, the heating rate and cooling rate of the nonlinear rapid temperature change test chamber will vary. Under the nonlinear mode of temperature variation characteristics, the test chamber may adopt different rates at different time periods during the heating or cooling process. For instance, the temperature rises rapidly in the initial stage and gradually slows down in the subsequent stages, forming an irregular temperature change curve. This mode is closer to the temperature fluctuation characteristics in actual complex environments.

I. Application Scenarios

It is mainly used to simulate the unstable temperature environment that electronic products encounter under different working intensifies, such as rapid temperature rise during high-intensity working stages and gradual temperature drop during low-intensity working stages. Compared with the linear mode, the nonlinear mode can better restore the temperature change law in the real scene.

The difference from the linear mode:

(1)Rate stability: The linear mode maintains a fixed rate throughout the entire process (such as 3℃/min or 10℃/min), while the rate in the nonlinear mode is dynamically adjusted over time.

(2)Control mode: Linear by precise control, nonlinear dependence performance with the device itself, the average rate is determined by the high and low temperature cycle.

(3) The scope of application: Nonlinear extreme or become more suitable for simulation working condition of the environment, and the linear for conventional reliability test.

 

II. Performance and Function

(1) Nonlinear temperature variation control: Supports custom temperature variation rate curves (e.g., 5C/min→10C/min - 3C/min), simulating non-uniform temperature changes of products in real environments (such as cold start of a car, sudden temperature drop at high altitudes).

(2) Wide range temperature variable rate: 3℃/min ~ 25℃/min continuous adjustable, covering from slow gradient to demand rapid temperature change of the whole scene.

(3) The high precision control, temperature uniformity of ±1.0℃, or less volatility ±0.3℃ or less (light), to ensure consistency test.

(4) Multifunctional integration: optional humidity control samples (10% ~ 98% RH), multi-channel temperature monitoring (100 + thermocouple support).

 

1.Production raw materials of nonlinear rapid temperature change test chamber CE

Components

Materials

Advantages

Inner cabinet

SUS#304 stainless steel

Corrosion-resistant and resistant to high-temperature deformation.

Insulation material

Vacuum insulation board (VIP)+ polyurethane foam

Ultra-low thermal conductivity(0.005 W/m·K).

Compressor

German Bitzer variable frequency compressor

Energy saved by 30% and the temperature change response speed increased by 40%.

Control system

Siemens PLC + 10.1 Inch industrial touch screen.

Support Python script programming.

2. Customer base

(1)· New energy vehicles: Battery pack /BMS charge and discharge temperature variation test (simulating real driving conditions).

(2) Aerospace, airborne equipment high temperature attenuation test (DO - 160 standard).

(3) Semiconductor chip thermal fatigue test ((JESD22 - A104 nonlinear curve).

(4) Medical equipment: in vitro diagnostic device temperature adaptability validation (hl-tech corporation).

3. Industry positioning

(1) Traditional linear temperature conversion boxes only support a fixed rate, while the actual ambient temperature changes are mostly nonlinear (such as diurnal temperature difference, mechanical start and stop).

(2) The equipment fill the blank of the market and provide dynamic variable speed test ability, become the reliability verification for the next generation of standard equipment.

4. Core uses

(1)· Accelerated life test: Expose material fatigue defects (such as solder joint cracking) through variable temperature changes.

(2) The condition simulation test: reduction of product in a complex environment temperature load (such as electric vehicle charging winter).

(3) Failure analysis: repetition nonlinear temperature change caused by intermittent failures.

5. Core technology

(1)AI temperature variation algorithm: Automatically optimize the distribution of cooling/heating power based on load to ensure that the curve tracking deviation is less than ±1.5℃.

(2) The area coordination control, independent control of the top/bottom/wall temperature field, eliminate the gradient of temperature difference.

(3) Digital mr.li interface: support import CAD models to predict thermal distribution inside the sample (optional).

6. Core Highlights

(1) Nonlinear temperature variation: Customize the rate curve (step/ramp/sine), bid farewell to fixed linearity.

(2) The wide speed regulation: 3 ~ 25℃ / min infinitely variable speed, full IEC/GB/MIL standards.

(3) Data through: Synchronous sample temperature record temperature + 100 road, cloud generated heat distribution.

(4) IIoT interconnection: Support the MQTT protocol access to the Internet of things platform factory.

(5) Free tool maintenance: Modular design, the compressor replacement only 15 minutes.

7. Customer's Most Concerned Questions (FAQ)

Q1: What are the differences from linear temperature change chambers and temperature shock chambers?

Mode

Temperature variation mode

Typical application scenarios

Linear temperature changechamber

Fixed rate 5℃/min

Basic temperature cycling test

Temperature shock chamber

Instant switching<10s

Material ultimate endurance test.

Nonlinear temperature changechamber

Custom variable speed curve

Simulation of real environmental conditions

8. Product advantages on nonlinear rapid temperature change test chamber price

(1) Realistic simulation: Restore the non-uniform temperature variation in the actual usage environment of the product.

(2) The authors efficiency: a single equipment replacement "linear temperature box + hit box" combination.

(3) The traditional solution defects: test deviation with the actual working condition of fixed rate as high as 60%.

9. Instructions for Use (Key Steps)

(1) Curve programming: touch screen or import CSV temperature - time curve drawing.

(2) The sample layout: heavy to use carbon fiber samples (50% weight loss, thermal conductivity <0.5 W/m · K).

(3) Safety protection: open condensation prevention mode (automatic control humidity prevent dewing) sample.

Keywords

Further details

 

Team Highlights

Guangzhou Jiaoguang Asia Exhibition

Guangzhou Jiaoguang Asia Exhibition

Guangzhou Jiaoguang Asia Exhibition

Guangzhou Jiaoguang Asia Exhibition

Shanghai Munich Exhibition

Shanghai Munich Exhibition

Company Qualifications

ISO
ISO
Trademark Certificate
CE
Nonlinear Rapid Temperature Change Test Chamber
Nonlinear Rapid Temperature Change Test Chamber
Nonlinear Rapid Temperature Change Test Chamber
+
  • Nonlinear Rapid Temperature Change Test Chamber
  • Nonlinear Rapid Temperature Change Test Chamber
  • Nonlinear Rapid Temperature Change Test Chamber

Nonlinear Rapid Temperature Change Test Chamber

Shuangyi Nonlinear Rapid Temperature Change Test Chamber - An expert in simulating the rate of temperature change in real environments. Feel free to contact us and get factory direct prices today.


Leave a Message Online

Note: Please provide your contact information, and our specialists will get in touch with you as soon as possible!

Submit Message