High Low Temperature Humidity Test Chamber
High Low Temperature Humidity Test Chamber
High Low Temperature Humidity Test Chamber
+
  • High Low Temperature Humidity Test Chamber
  • High Low Temperature Humidity Test Chamber
  • High Low Temperature Humidity Test Chamber

Shuangyi High Low Temperature Humidity Test Chamber In Stock

Simulate extreme environments to verify the ultimate reliability of the product.

The Shuangyi high low temperature humidity test chamber is a device used for low-temperature control. Quality engineer  stated that the refrigeration cycle of this equipment all adopts the reverse Carnot cycle, which consists of two isothermal processes and two adiabatic processes. The process is as follows: The refrigerant is adiabatically compressed by the compressor to a higher pressure, consuming work and raising the exhaust temperature. Then, the refrigerant undergoes isothermal heat exchange with the surrounding medium through the condenser, transferring heat to the surrounding medium.

I. Core Performance and Functions

1. Temperature and humidity range: -70℃ to +150℃,20% to 98%RH.

2. Accuracy control: Temperature ±0.1℃, humidity ±1%RH (IEC 60068 standard).

3. Rapid temperature change: The top 15℃/min linear rise temperature (20℃/min) can be customized.

4. Intelligent programming: Support 1000 program loop, a USB key export test data.

5. Safety protection: Independent over temperature protection, leakage power system, automatic alarm.

II. Craftsmanship Manufacturing and Raw Materials

1. Inner tank material: SUS#304 mirror-finish stainless steel (corrosion-resistant/easy to clean).

2. The thermal insulation layer, flame retardant high pressure polyurethane foam (120 mm thickness, energy saving 30%).

3. Refrigeration core: Germany than zell two-stage compressor (- 40℃ no-load refrigeration).

4. Humidity system: titanium alloy sheath type steam generator (scaling prevention design).

5. Environmental protection certification, EU CE safety instructions.

III. Target Customer Groups

1. Industry: Automotive electronics, Space military, Lithium batteries, semiconductors, and medical equipment.

2. Organization: general administration of quality supervision, inspection center, the third party lab, scientific research team in colleges and universities.

3. Functions: Reliability engineers, quality control department, research and development testing center.

IV. Industry Application Scenarios

Field

Typical use

Test standards

Auto parts

Cold start test for vehicle-mounted electronics.

ISO 16750

Consumer electronics

Mobile phone temperature and humidity cycling aging test.

GB/T 2423.34

New energy

Verification of high and low temperature charge and discharge performance of battery packs.

UL 1642

Material science

Analysis of Deformation of Polymer Materials in Damp Heat environment.

ASTM D1044

V. Core Technological Advantages

1. The precise environmental simulation technology

1) The PID + SSR coordinated control algorithm, temperature fluctuation degree < 0.3℃.

2) The Swiss import humidity sensor, use for a long time no drift.

2. High-efficiency and energy-saving design

1) Dynamic hot air bypass technology reduces cooling energy consumption by 40%.

2) Dual-channel condensate water recovery system, water-saving rate ≥65%.

VI. Core advantages

Item

Shuangyi test chamber

Industry standard products

Temperature uniformity

±0.5℃(No-load)

±2.0℃

Compressor life

100,000H(Laboratory measurement)

60,000H

Door seal

Silicone rubber double-layer airtight structure.

Single-layer rubber is prone to aging.

Data integrity

The last 100 sets of data will be automatically saved upon power failure.

The risk of data loss is high.

VII. The Top 5 Issues That Customers Care About the Most

Q1: Can rapid temperature change at -70°C be achieved?

A1: Standard dual-compressor cascade refrigeration, supporting -70°C@10°C/min (pre-cooling required).

Q2: How fast is the response speed of humidity control?

A2: Pulse steam humidification is adopted, and the set humidity value is reached within 5 seconds.

Q3: Is the daily maintenance cost of the equipment high?

A3: Annual maintenance only requires the replacement of the filter (accessory cost <$50).

Q4: Can the testing process be remotely monitored?

A4: Standard equipped with RS485 interface, and optional IoT cloud platform (real-time alarm on mobile phone).

Q5: Is on-site calibration service provided?

A5: Recommend metrology institutions in 36 countries around the world that support NIST traceable calibration (with CNAS/ILAC logos on the certificates).

VIII. Operating Instructions (Simplified Version)

1. Startup preparation

① Connect the drain pipe →② Inject deionized water →③ Power on and preheat for 30 minutes.

2. Testing process

Step1: In the samples (from inside 10 cm or higher).

Step2: Touch screen setup (or import the preset curve).

Step3: Launch the test to check the temperature and humidity curve in real time.

Step4: End automatically generate PDF report.

IX. Service Commitment if you buy high low temperature humidity test chamber from Shuangyi

(1)15-Month warranty for the entire machine and lifetime supply of spare parts at cost price.

(2) 48 hours emergency technical support around the world.

(3) Provide free ISTA procedure/GB standard test methods such as consulting.

The China high low temperature humidity test chamber accelerates product aging by simulating harsh environments, providing core data support for R&D improvement and quality certification. It is an indispensable device for industrial reliability testing. Let professional equipment speak and win trust with data - Submit your test requirements and get a technical solution within 3 hours!

Get a customized test plan immediately.

1)Free sample testing service is provided (for first-time customers only).

2)Supports OEM/ODM customization of special specifications.

Keywords

Further details

 

Team Highlights

Guangzhou Jiaoguang Asia Exhibition

Guangzhou Jiaoguang Asia Exhibition

Guangzhou Jiaoguang Asia Exhibition

Guangzhou Jiaoguang Asia Exhibition

Shanghai Munich Exhibition

Shanghai Munich Exhibition

Company Qualifications

ISO
ISO
Trademark Certificate
CE

Leave a Message Online

Note: Please provide your contact information, and our specialists will get in touch with you as soon as possible!

Submit Message