Three-Chamber Thermal Shock Test Chamber
Three-Chamber Thermal Shock Test Chamber
Three-Chamber Thermal Shock Test Chamber
+
  • Three-Chamber Thermal Shock Test Chamber
  • Three-Chamber Thermal Shock Test Chamber
  • Three-Chamber Thermal Shock Test Chamber

Three-Chamber Thermal Shock Test Chamber

Accurately simulate extreme temperature changes to verify the ultimate reliability of the product.

The three-chamber thermal shock test chamber is an industrial testing device used to test the performance of materials or products under extreme temperature changes. It consists of a high-temperature zone, a low-temperature zone and a testing zone, and uses pneumatic damper switching to achieve temperature shock. It is mainly applied in the defense, automotive, electronic, chemical materials and other industries. Its temperature shock range covers (+60℃ to +150℃)/ (-40℃ to -10℃), and it can complete temperature recovery within 3 minutes. It has a precise temperature control capability with a fluctuation of ±0.5℃ and a deviation of ±2.0℃.

The three-chamber thermal shock test chamber manufacture by Shuangyi features a double-sided galvanized steel plate outer box and a SUS304 stainless steel inner box, combined with rigid polyurethane foam and glass fiber insulation layers. The refrigeration system adopts mechanical cascade technology and is equipped with French Tecumseh compressors and environmentally friendly refrigerants. The control system is equipped with a color touch screen, PLC module and anti-integral saturation PID algorithm, supporting the storage of 100 groups of programs and data recording. Safety protection includes multiple mechanisms such as compressor overload and over-temperature protection, and it is strictly prohibited to test flammable, explosive and corrosive substances.

 

I.Product Introduction

 

1. Performance and Function

Items

Spec

Three-slot independent structure

High-temperature zone/Low-temperature zone/test zone

Interior dimension

50*50*50cm(standard type)

Temperature range

-70℃~+200℃

Temperature fluctuation

±0.3℃

Rate of temperature chamber

>50C/min(Pneumatic cantilever conversion technology)

Temperature uniformity

±0.5℃(Conform toIEC 60068-2-14 standard)

Transfer time

≤10s(Mechanical)

Noise level

≤65dB(A)

Power supply

3 phase 4 wires AC 380V 50Hz

2. The production of raw materials

(1) The tank: SUS304 aviation grade stainless steel (corrosion/resistance to deformation).

(2) The thermal insulation layer: rigid polyurethane foam (thickness of 120 mm, 30% energy saving).

(3) Core components: Germany than zell compressor + Switzerland rich valve (military level stability).

3. Customer base on three-chamber thermal shock test chamber

(1) The electronics industry, PCB, chip manufacturers, mobile phone components.

(2) Automobile industry: new energy battery, sensor, wiring harness suppliers.

(3) The aerospace defense industry: satellite components, aviation materials laboratory.

(4) Scientific research institutions: the material failure analysis center, quality inspection institutions.

4.Industry application scenarios

(1) Cold and hot failure tests for electronic components and thermal fatigue tests for metallic materials.

(2) Detection of embrittlement points of polymer materials and verification of environmental adaptability of military products.

5. The core technology

(1) The multi-stage dual channel PID intelligent temperature control algorithm) redundant safety protection system.

(2) Pneumatic no impact on the hanging basket iot transformation) remote monitoring (4 g/WiFi).

II. Five Core Highlights

1.Zero-wait conversion: Independent temperature zone pre-cooling and heating, the test sample can be switched from -55℃ to +150℃ within 10 seconds.

2. Energy conservation and consumption reduction: It saves 40% energy compared with the traditional two-tank type (patented insulation structure + cold energy recovery system).

3. Sample: zero injury pneumatic suspension transportation technology, avoid mechanical vibration interference. 4. Intelligent management: 100 pairs of programming support, data can be exported PDF/Excel.

5. Military-grade reliability: MTBF (Mean Time Between Failures) >10,000 hours.

III. The 8 Most Concerned Issues of Customers

Q1: Will temperature conversion produce condensation water?

A1: Exclusive wind curtain isolation technique, humidity control < 15% RH.

Q2: What's the maximum load test?

A2: Standard type bearing 35 kg to 100 kg (can be selected heavy basket).

Q3: Equipment need special field?

A3: Single-phase 220 v power supply, thermal dissipation space has been back 80 cm or more.

Q4: What is the maintenance cost?

A4: Annual maintenance simply replace desiccant (free remote diagnosis).

Q5: Conform to auto industry standard?

A5: Meet the GMW3172, TL226 car companies and 20 + item specification.

Q6: Temperature recovery time how long?

A6: Extreme conversion within 5 minutes after the set temperature.

Q7: Third-party accreditation can do?

A7: Factory with CNAS calibration certificates (support the field check).

Q8: Equipment life cycle?

A8: Core part 1 year warranty (compressor/control system).

IV. Four Major Advantages over Traditional Models

Functions

Three-slot type (our product)

Tradition model

Temperature variation efficiency

<10s

>30s

Temperature stability

±0.5℃

±2.0℃

Sample adaptability

Measurable liquid/viscous materials

Solid samples only

Long-term usage cost

Electricity bill savings of 40%

High energy consumption

V. Operating Instructions (Simplified Version)

4-step start test

1. Loading: Place the sample in the hanging basket (at a time ≤ 80% of the volume).

2. Set the cords: touch screen setting temperature curve (ladder support/cycle mode).

3. Monitoring: real-time by mobile phone APP to check the temperature change curve.

4. Analysis: automatic generation of test report (including failure point mark).

▲Safety warning

(1)Prohibit test flammable items.

(2) During the temperature conversion don't open the window.

(3) Run self-checking program once a month.

VI. Why choose us to buy three-chamber thermal shock test chamber?

(1) 18 years experience in environmental testing equipment manufacturers.

(2) Passed ISO9001/14001 double certification.

(3) The world's 2000 + customer case (Tesla, Huawei supply chain).

(4) To provide free sample service (limited standard model).

Get your exclusive plan China three-chamber thermal shock test chamber now.

↓ Click to consult an engineer ↓

(Includes exclusive test templates for the automotive electronics/semiconductor industry.)

Keywords

Further details

 

Team Highlights

Guangzhou Jiaoguang Asia Exhibition

Guangzhou Jiaoguang Asia Exhibition

Guangzhou Jiaoguang Asia Exhibition

Guangzhou Jiaoguang Asia Exhibition

Shanghai Munich Exhibition

Shanghai Munich Exhibition

Company Qualifications

ISO
ISO
Trademark Certificate
CE

Leave a Message Online

Note: Please provide your contact information, and our specialists will get in touch with you as soon as possible!

Submit Message