Product usage
The high altitude low pressure test chamber is a device used to simulate a high-altitude low pressure environment,mainly for testing the performance and reliablity of products under low pressure conditions.This kind of equipment is widely used in aerospace,electronics,automobiles,materials science and other fields to ensure the normal operation of products in high-altitude or space environments.
Temperature range
It's usually between-70℃and+150℃,and some equipment can reach-40℃to+150℃or-60℃to+150℃.
Temperature fluctuation:±0.5℃(under normal pressure and no-load conditions).
Temperature uniformity:2℃or less(atmospheric pressure,when the light).
Pressure range
The pressure range is typically from atmospheric pressure to 0.5kPa,and some equipment supports atmospheric pressure to 1kPa or 40kPa.
Pressure deviation:±0.1kPa~±5%,depending on the pressure range.
Blood pressure reduction time
.The time for the pressure to drop from normal to the target pressure(such as 0.5kPa)is usually≤30 minutes or≤45 minutes.Heating and cooling performance.
.Heating rate:1.0℃/min~3.0℃/min
.Cooling rate:0.7℃/min~1.0℃/min
Technical parameters
Model | YP-HW-100L | YP-HW-150L | YP-HW-225L | YP-HW-408L | YP-HW-800L | YP-HW-1000L |
Inner size(mm) | W500*H500*D400 | W500*H600*D500 | W600*H750*D500 | W800*H850*D600 | W1000*H1000*D800 | W1000*H1000*D1000 |
Outer size(mm) | W750*H1550*D1300 | W750*H1750*D1400 | W850*H1800*D1450 | W1050*H1900*D1550 | W1250*H2080*D1750 | W1250*H2080*D1950 |
Capacity(L) | 100 | 150 | 225 | 408 | 800 | 1000 |
Weight (kg) | 280 | 380 | 450 | 620 | 680 | 840 |
Temperature range | -70°℃~+180℃(A:0℃ to 180℃;B:-20℃ to 180℃;C:-40 Cto 180℃;D:-70℃ to 180℃) | |||||
Temperature variation | ±0.5℃ | |||||
Cooling rate | 180℃ to-70℃ within 100min 1.0℃ to 3.0℃/min | |||||
Heating rate | -70℃ to +180℃ within 60min 3.0℃ to 5.0°C/min | |||||
Temperature distribution | ±1.5°℃(-40.0℃~100.0℃); ±2.0℃(100.1℃~180.0℃/-40.0℃~-70.0℃) | |||||
Pressure range | Atmospheric pressure to 0.5KPa. | |||||
Pressure deviation | ≤+0.1KPa(≤2KPa);≤+5%KPa(2KPa to 40KPa);≤+2KPa(≥40KPa) | |||||
Pressure reduction time | ≤20min;≤25min;≤30min;≤45min | |||||
Pressure recovery rate | ≤10KPa/min | |||||
Interior material | 1.2mm thick of SUS#304 stainless steel | |||||
Exterior material | 1.2mm thick of cold-rolled steel plate /powder-coated. | |||||
Insulation material | 100mm thick polyurethane storage board+10mm thick glass wool | |||||
Fan | Centrifugal fan | |||||
Compressor | Fully endosed Tecumseh compressor | |||||
Condenser | Air-Cooled /Water-Cooled | |||||
Refrigerant | R404A,R23,R508 | |||||
Evaporator | Finned tube heat exchanger | |||||
Heater | Nickel-Chromium alloy heating wire | |||||
Humidifier | Steam humidifier | |||||

Keywords
Further details


Team Highlights
Guangzhou Jiaoguang Asia Exhibition
Guangzhou Jiaoguang Asia Exhibition
Shanghai Munich Exhibition
Company Qualifications
Test electronic equipment at high altitude
Contact Information
Category