Plateau High Altitude Low Pressure Test Chamber
Plateau High Altitude Low Pressure Test Chamber
Plateau High Altitude Low Pressure Test Chamber
+
  • Plateau High Altitude Low Pressure Test Chamber
  • Plateau High Altitude Low Pressure Test Chamber
  • Plateau High Altitude Low Pressure Test Chamber

Product usage

The high altitude low pressure test chamber is a device used to simulate a high-altitude low pressure environment,mainly for testing the performance and reliablity of products under low pressure conditions.This kind of equipment is widely used in aerospace,electronics,automobiles,materials science and other fields to ensure the normal operation of products in high-altitude or space environments.

Temperature range

It's usually between-70℃and+150℃,and some equipment can reach-40℃to+150℃or-60℃to+150℃.

Temperature fluctuation:±0.5℃(under normal pressure and no-load conditions).

Temperature uniformity:2℃or less(atmospheric pressure,when the light).

Pressure range

The pressure range is typically from atmospheric pressure to 0.5kPa,and some equipment supports atmospheric pressure to 1kPa or 40kPa.

Pressure deviation:±0.1kPa~±5%,depending on the pressure range.

Blood pressure reduction time

.The time for the pressure to drop from normal to the target pressure(such as 0.5kPa)is usually≤30 minutes or≤45 minutes.Heating and cooling performance.

.Heating rate:1.0℃/min~3.0℃/min

.Cooling rate:0.7℃/min~1.0℃/min

Technical parameters

Model

YP-HW-100L

YP-HW-150L

YP-HW-225L

YP-HW-408L

YP-HW-800L

YP-HW-1000L

Inner size(mm)

W500*H500*D400

W500*H600*D500

W600*H750*D500

W800*H850*D600

W1000*H1000*D800

W1000*H1000*D1000

Outer size(mm)

W750*H1550*D1300

W750*H1750*D1400

W850*H1800*D1450

W1050*H1900*D1550

W1250*H2080*D1750

W1250*H2080*D1950

Capacity(L)

100

150

225

408

800

1000

Weight (kg)

280

380

450

620

680

840

Temperature range

-70°℃~+180℃(A:0℃ to 180℃;B:-20℃ to 180℃;C:-40 Cto 180℃;D:-70℃ to 180℃)

Temperature variation

±0.5℃

Cooling rate

180℃ to-70℃ within 100min 1.0℃ to 3.0℃/min

Heating rate

-70℃ to +180℃ within 60min 3.0℃ to 5.0°C/min

Temperature distribution

±1.5°℃(-40.0℃~100.0℃); ±2.0℃(100.1℃~180.0℃/-40.0℃~-70.0℃)

Pressure range

Atmospheric pressure to 0.5KPa.

Pressure deviation

≤+0.1KPa(≤2KPa);≤+5%KPa(2KPa to 40KPa);≤+2KPa(≥40KPa)

Pressure reduction time

≤20min;≤25min;≤30min;≤45min

Pressure recovery rate

≤10KPa/min

Interior material

1.2mm thick of SUS#304 stainless steel

Exterior material

1.2mm thick of cold-rolled steel plate /powder-coated.

Insulation material

100mm thick polyurethane storage board+10mm thick glass wool

Fan

Centrifugal fan

Compressor

Fully endosed Tecumseh compressor

Condenser

Air-Cooled /Water-Cooled

Refrigerant

R404A,R23,R508

Evaporator

Finned tube heat exchanger

Heater

Nickel-Chromium alloy heating wire

Humidifier

Steam humidifier

Keywords

Further details

 

Team Highlights

Guangzhou Jiaoguang Asia Exhibition

Guangzhou Jiaoguang Asia Exhibition

Guangzhou Jiaoguang Asia Exhibition

Guangzhou Jiaoguang Asia Exhibition

Shanghai Munich Exhibition

Shanghai Munich Exhibition

Company Qualifications

ISO
ISO
Trademark Certificate
CE

Leave a Message Online

Note: Please provide your contact information, and our specialists will get in touch with you as soon as possible!

Submit Message