Small High Low Temperature Humidity Test Chamber
Precise temperature and humidity control | Laboratory-grade reliability | Desktop efficient solution
Shuangyi small high low temperature humidity test chamber belongs to Dongguan Yipin Instrument Equipment. It has a large production base in Dongguan, with a factory area of over 10,000 square meters. Its main products include programmable constant temperature and humidity test chambers, high and low temperature test chambers, thermal shock test chambers, walk-in temperature and humidity alternating test rooms, high-altitude and low-pressure test chambers and other environmental testing equipment. Specializing in the production of environmental reliability test equipment for 20 years, we offer discounted China small high low temperature humidity test chambers for bulk purchases.
I. Core Performance and Functions
|
Temperature humidity range |
-70℃ ~ +150℃ / 20% ~ 98% RH |
|
Accuracy control |
±0.3℃,±2% RH |
|
Heating & cooling rate |
≥3℃/min (linearly controllable). |
|
Intelligent system |
7-inch touch screen + cloud data storage (supporting remote monitoring) |
|
Safety protection |
Independent over-temperature protection, leakage power-off, and delayed start of the compressor. |
II. Industrial Grade Raw Materials and Manufacturing
1. Inner tank material: SUS304 stainless steel (corrosion-resistant/anti-condensation.
2. Insulation layer: High-density polyurethane foam (energy saving of over 30%.
3. Core component:
1) French or German brand frequency conversion compressor (low noise and energy saving).
2) Taiwan (a life of five years or more) of temperature and humidity.
3) Military level sealing strip (long-term leakage proof).
III. Small high low temperature test chamber of customer group
1. The electronics industry, PCB, chip, high and low temperature aging test.
2. Auto parts: sensors, connectors, weatherability validation.
3. Pharmaceutical research and development, drug stability test (ICHQ1A standard).
4. Research institutions: Material coefficient of thermal expansion and transformation research.
5. Aerospace: Airborne equipment extreme environment simulation.
IV. Solutions to Industry Pain Points
|
User pain points |
Countermeasure |
|
The laboratory space is limited. |
Desktop design (≤0.5m² floor space). |
|
It is difficult to trace the test data. |
USB/RS485 interface + CSV format export |
|
High energy consumption cost |
Variable frequency technology energy-saving mode (30% electricity saving). |
|
The temperature and humidity fluctuate greatly. |
PID adaptive algorithm (Fluctuation ≤±0.5℃) |
V. Six major technical highlights
1. Binary duct: uniformity of ±1℃ (GB/T10586 validation).
2. Programmable stress test: Support 100 groups of stepwise temperature and humidity curve.
3. Quick recovery technology: Open the door after 3 minutes to restore setting environment.
4. Condensate from the emissions: Anti-icing design 40 c run continuously.
5. EMC anti-interference: Through IEC61000-4 industrial electromagnetic certification.
6. Modular design: The compressor/heater can be quickly replaced.
VI. The Top 10 Most Concerned Questions by Customers (FAQ)
Q1: Is third-party calibration supported?
A1: NIST traceability interface reserved, CNAS calibration certificate template.
Q2: -70℃ need liquid nitrogen?
A2: Single compressor cascade technology (without external cold source).
Q3: What is the minimum temperature limit for humidity control?
A3: In -40℃to realize stable control - wet (leading).
Q4: Customized service cycle?
A4: Size/weight/communication protocol customization (response) within 5 working days.
VII. Four Major Advantages over Competitors
|
Parameter |
Shuangyi test chamber |
Tradition test chamber |
|
Energy efficiency |
0.8kW/h (operating condition at -40℃) |
≥1.5kW/h |
|
Noise |
≤59dB(1meter distance) |
≤70dB(1meter distance) |
|
Maintenance |
Self-diagnostic fault code |
Professional personnel are required for inspection. |
|
Extensibility |
Optional IOT module (4G access) |
Only local control |
VIII. Operating Instructions (Simplified Version)
4-step quick start
1. Place the sample (at least 5cm away from the inner wall).
2. Touchscreen Settings program (or import preset curves).
3. Start automatic recording (store data in the cloud).
4. Complete collection → One-click high-temperature sterilization (optional).
▲Safety Notice: Do not test flammable and explosive substances! Clean the drain pipe regularly.
Get a free solution consultation right away
1. Provide sample testing service (1-day free trial).
2. Support OEM/ODM customization (over 200 successful cases).

Keywords
Further details


Team Highlights
Guangzhou Jiaoguang Asia Exhibition
Guangzhou Jiaoguang Asia Exhibition
Shanghai Munich Exhibition
Company Qualifications
Small High Low Temperature Humidity Test Chamber
Contact Information