High Low Temperature Humidity Alternating Test Chamber
+
  • High Low Temperature Humidity Alternating Test Chamber

In an era where product quality determines market competitiveness, the Shuangyi high low temperature humidity alternating test chamber, by simulating the harshest environmental conditions, has become a core technical equipment for ensuring product reliability. This device can accurately reproduce an alternating environment ranging from -70℃ extreme cold to 150℃ high temperature, and in combination with a humidity range of 20% to 98%RH, it provides a test platform for accelerated aging, performance verification and failure analysis of products in various industries.

I.Core performance and technical parameters

Technical parameters

Technology index

Test conditions

Temperature range

-70℃~+150℃

Please specify the low-temperature starting point when placing an order.

Humidity range

20%~98%RH

In 25℃ to 80℃ effective range

Temperature uniformity

≤±2℃

Empty load

Temperature fluctuation

±0.5℃

Empty load

Humidity fluctuation

±2%RH

Empty load

Heating rate

1.0~3.0℃/min

Nonlinear rate

Cooling rate

0.7~1.2℃/min

Nonlinear rate

Program capacity

100sets of programs *100sections *100times cycles

Time setting 99H59M/Section

Noise

<60dB

Silent operation standard

II. Five Core Highlights of the Product of China High low temperature humidity alternating test chamber

1. Extreme environmental simulation capability: It achieves an ultra-low temperature of -70°C through a cascade refrigeration system (French Tecumseh compressor +R404A/R23 environmentally friendly refrigerant), combined with far-infrared nickel alloy heaters (2KW×2) and steam humidification technology, precisely constructing any climate environment around the world.

2. Military level structure design: the shell is made of 1 mm thick A3 steel plate phosphating coating, the tank for the SUS304 stainless steel mirror, 100 mm high density fiberglass insulation layer to ensure that the energy consumption reduced by 30%. Double-layer silicone rubber sealing strips ensure long-term high sealing performance.

3. Intelligent control system configuration: South Korea TEMI850 touch screen controller, support Chinese and English interface switch, have the RS - 485 remote monitoring function. The capacity of 100 groups of programs ×100 segments ×999 cycles meets the complex testing requirements.

4. Safe and reliable operation, equipped with eight heavy security protection: overload/compressor overpressure protection, leakage protection, water shortage alarm, fan overheating protection, fault since the downtime, etc., ensure the security of the 7 * 24 hours of continuous operation.

5. Visualization experimental process: multi-layer hollow toughened glass observation window equipped with electric heating defrosting function, the built-in LED lighting, even if the samples in the oven - 70℃ environment can still be observed clearly.

III. Key customer groups and application scenarios

1. Aerospace: Thermal vacuum adaptability verification of satellite components, structural stability testing of composite materials under temperature variation conditions (conforming to GJB150A standard).

2. Auto manufacturing: new energy battery pack cold and hot shock tests, performance verification of vehicle electronic in hot and humid environment, rubber seal aging test.

3. Electronic communications: 5 g base station equipment high temperature and high humidity (double 85) test, chip heat cycle reliability assessment (IEC60068-2 standard).

4. Medical equipment: surgical instrument material corrosion resistance testing, drug packaging sealing wet and heat aging test and verify.

5. Research institutes: new materials, the phase transformation point of nano coating failure analysis of damp and hot, battery electrolyte performance test at low temperature.

IV. The top five issues that Customers care about the most

Q1: How can the long-term operational stability of the equipment be guaranteed?

A1: Adopt modular design: The refrigeration/heating/humidification systems operate independently; The average mean time between failures of French Tecumseh compressors is over 50,000 hours. All electrical components are made of Schneider industrial-grade products.

Q2. How does it perform during extreme temperature transitions?

A2: Nonlinear temperature variation is achieved through slope control algorithm: -40℃ to 85 ℃ in just 18 minutes (no-load) : Dynamic cooling compensation technology is adopted to avoid temperature overshoot.

Q3: 3. How can the accuracy of humidity control be guaranteed?

A3: Dual-mode humidification system: external boiler steam type + infrared electric heating tube; The PID+SSR collaborative control, in combination with the PT100 platinum sensor, achieves a fluctuation range of ±2%RH.

Q4: Is equipment maintenance complicated?

A4: It provides an automatic defrosting function (to prevent ice blockage in the evaporator); Self-cleaning design for waterways It is recommended that the compressor be dusted every 2,000 hours. Provide a fault diagnosis guide for mobile devices.

Q5: Does it meet the industry certification standards?

A5: Certified by the National Environmental Test Equipment Testing Center; Complies with 12 national military standards/national standards such as GB/T2423 and GJB150A; Provide a third-party test report.

V. In-depth Analysis of Technical Advantages

1.Energy-saving refrigeration system: Innovatively adopts a two-stage energy-saving strategy - R404A+R23 is activated during cooling, and only R404A is activated during dehumidification, reducing energy consumption by 40%.

2. The thermal equilibrium temperature control technology, through the PID + SSR collaborative algorithm real-time correction deviation, temperature and humidity temperature resolution of plus or minus 0.1 C, humidity display RH1 accuracy of 0.1%.

3. The anti-interference design: centrifugal rotor wing for a vertical diffusion circulation; The test hole (Φ50mm on the left) is treated with electromagnetic shielding to ensure the accuracy of signal testing.

4. The cloud data management: support the LIMS docking, can deduce the temperature curve through the RS - 485 interface, automatic generation of PDF test report.

VI. Guide to Use and Maintenance if buy Customized High low temperature humidity alternating test chamber.

1. Installation requirements

(1) The power configuration: AC380V±10% (three-phase five wire), 8 kw28 power or greater.

(2) The space requirements: equipment around the thermal dissipation space has been reserved 80 cm or more, the environment temperature 5℃ to 28℃.

(3) The ground bearing: ≥500 kg/m2 (full load condition).

2. Operating procedures

(1) Sample tank within no more than a third, ensure smooth duct.

(2) The program Settings: By TEMI controller set temperature slope a heat preservation time cycles.

(3) Remote monitoring: Real-time by PC software.

(4) Check the temperature and humidity curve emergency treatment: meet alarm automatic stop, fault code shown at the top right corner of the screen.

3. Key maintenance nodes

Daily

Check the water level in the water tank (distilled water is recommended)

Monthly

Clean the evaporator/condenser filter screen (blow it with compressed air, do not use organic solvents).

Quarterly

Calibrate the PT100 sensor (accuracy±0.1°C)

Annual

Replace the door seal and replenish the refrigeration oil for the compressor.

High low temperature alternating test chamber Shuangyi of manufacturer as the cornerstone of modern industrial reliability engineering, through constant innovation cascade refrigeration technology, intelligent control system of the working class structure design, continue to promote the aerospace, new energy vehicles, high-end quality upgrade in the field of electronics. By choosing our test chamber, you will not only obtain national-certified testing equipment, but also enjoy lifetime technical support and a 2-hour response after-sales service guarantee.

Note: All technical parameters are based on the GB/T2423-2012 standard test environment (room temperature 25°C±3°C, humidity 50%RH±10%). Actual use must strictly follow the requirements of the operation manual.

Keywords

Further details

 

Team Highlights

Guangzhou Jiaoguang Asia Exhibition

Guangzhou Jiaoguang Asia Exhibition

Guangzhou Jiaoguang Asia Exhibition

Guangzhou Jiaoguang Asia Exhibition

Shanghai Munich Exhibition

Shanghai Munich Exhibition

Company Qualifications

ISO
ISO
Trademark Certificate
CE
High Low Temperature Humidity Alternating Test Chamber
+
  • High Low Temperature Humidity Alternating Test Chamber

High Low Temperature Humidity Alternating Test Chamber

High low temperature humidity alternating test chamber: A reliability testing expert that precisely simulates extreme environments.The preferred environmental simulation testing solution for aerospace, automotive electronics, scientific research and medical fields.


Leave a Message Online

Note: Please provide your contact information, and our specialists will get in touch with you as soon as possible!

Submit Message