Floor-Standing High Low Temperature Humidity Test Chamber
+
  • Floor-Standing High Low Temperature Humidity Test Chamber

Whether it is the performance of automotive parts in extremely cold regions or the reliability of electronic products in tropical high-humidity environments, all can be scientifically verified through this Floor-Standing High Low Temperature Humidity Test Chamber.

 

I.Core Performance and Technical Highlights from Floor-standing high low temperature humidity test chamber supplier

1. Outstanding environmental simulation capability

1) Wide temperature control range: Full coverage from -70°C to +180°C, meeting various testing requirements from extremely cold to ultra-high temperatures.

2) Precision humidity control: 10% to 98% RH wide range adjustment ability, volatility only ± 2% RH.

3) The ability of fast temperature, heating rate of 5℃/min, the cooling rate of 3℃/min, greatly improve the test efficiency.

2. Innovate energy-saving technologies

1) Dual mode humidification system: combining ultrasonic atomization and steam humidifying technology, precision control of humidity, reduce energy consumption at the same time.

2) The technology of electronic expansion valve: energy saving 20% 50% than conventional equipment, significantly reduce the cost of long-term use.

3) Composite insulation structure: adopt rigid polyurethane foam + glass fiber cotton multilayer insulation design, heat loss by 30%.

3. Intelligent control system

1) 7-inch TFT color touch screen: Intuitively displays temperature and humidity curves, supports program editing and real-time monitoring.

2) United remote controller: through RS - 232 interface and the network connection, realize remote monitoring and data download.

3) Fault self-diagnosis system: real-time monitoring equipment status, the potential fault early warning, to reduce unplanned downtime.

 

4. Robust and reliable structural design

Structural parts

Material & techniques

Performance advantages

Outside box

Phosphating & electrostatic powder coating of carbon steel plates.

Corrosion-resistant & impact-resistant

Interior material

SUS#304 Mirror stainless steel

High & low temperature, easy to clean.

Sealing system

Double-layer silicone rubber door seal

Super strong sealing & anti-aging

Visual window

Three layers vacuum heated glass

Anti-condensation, high light transmittance

II. Application Scenarios and Industry Solutions of China Floor-standing high low temperature humidity test chamber

1. The field of automotive manufacturing

Test vehicle electronic, rubber seals, coating in the freezing to 120℃ to 40℃ high temperature environment changes, the performance of simulation from the northern winter to summer season equator global climate condition, found in advance the material expansion shrinkage, electronic component failure etc.

2. Testing of new energy batteries

For power battery module and the energy storage system for temperature and humidity cycle test, verify the battery cycle life and safety of in extreme environment, meet UN38.3 safety certification requirements, etc. The 3600L large-capacity design can accommodate the entire battery pack.

3.Electronic and electrical industry

Simulate the high-humidity coastal environment (40℃/95%RH) and rapid temperature change conditions to test the moisture-proof performance of circuit boards, the reliability of component solder joints and the weather resistance of the entire machine, and reduce the on-site failure rate.

4.Aerospace applications

Verify satellite components in space extreme environment (-60℃ to +150 ℃) under the materials and electronic system reliability, stability and military level accuracy standards (temperature deviation plus or minus 0.5℃).

5.Scientific research and quality inspection institutions

Provide testing environments that comply with standards such as GB/T2423, IEC60068, and GJB150 for materials research institutes and third-party testing centers, and support the development of new materials and product quality certification.

 

III. The six most Concerned Issues of Customers if buy Floor-standing high low temperature humidity test chamber

1. How to choose the volume of the equipment?

We offer a full range of options from standard type (60L) to walk-in type (3600L). The 3600L super large capacity can accommodate an entire children's car or multiple sets of cabinet equipment.

2.Operational stability under extreme temperatures?

It adopts two-stage compression refrigeration technology (French Tecumseh compressor) and nickel-chromium alloy heater to ensure stable operation from -70℃ ultra-low temperature to 180℃ high temperature.

3.How to deal with sudden power outages?

Equipped with a power-off memory protection system, it will automatically resume operation after power is restored to prevent test interruption. Triple over-temperature protection prevents sample damage.

4.Key points for daily maintenance of equipment?

Clean the evaporator filter screen every month and check the refrigerant pressure every quarter. The humidifier uses deionized water to reduce scale accumulation.

5.Can special sizes be customized?

Supports non-standard customization. The inner tank size, test hole positions, and sample rack layout can all be adjusted as needed. The fastest delivery is within 15 days.

IV. Panoramic View of Product Advantages

1.Precise environmental simulation: Temperature fluctuation ±0.2°C, humidity deviation ≤±3%RH, far exceeding the national standard requirements.

2.Rugged construction, reinforcing the SUS304 stainless steel tank + framework design, can withstand high low-temperature impact for a long time.

3.Intelligent operation experience: Support USB data export, program chain, multi-language interface, lower the difficulty of operation.

4.Comprehensive security protection: equipped with leakage/short circuit/compressor overload eight heavy protection system.

5.Flexible customization services: according to the need to adjust the volume, temperature range, rack configuration.

6.Energy conservation and environmental protection design: refrigerant R404A environmental protection, energy consumption reduced by 30% than conventional equipment.

7.Perfect after-sale support: 12 service outlets, the key parts is one year warranty.

 

 

V. Instructions for Use and Maintenance Guide

1. Installation requirements

1) Environmental conditions: Temperature +5 to 35°C, humidity ≤85%RH, avoid direct sunlight.

2) Power supply configuration: three phase four wire AC380V plus or minus 10%, separate grounding (grounding resistance < 4 Ω).

3) Space reserved: equipment keep around 80cm or more maintenance space.

2. Operating procedures

1) Sample placement: Ensure that the sample spacing is ≥5cm to avoid blocking the circulation air outlet.

2) Set parameters: with a touch screen setting temperature and humidity curve (support 50 programming).

3) Run monitoring: through the observation window and lights in real time to check the sample status.

4) Data export: historical data via USB download CSV format.

3.Key maintenance plan

Cycle

Maintain items

Operational guideline

Weekly

Clean the water tank

Wipe the sink with a soft cloth & replace it with deionized water.

Monthly

Evaporator dust removal

Blow the heat dissipation fins with compressed air.

Quarterly

Maintenance fo sealing strips

Apply silicon-based grease to prevent aging.

Annual

Refrigerant detection

Measure the system pressure & replenish environmentally friendly refrigerant.

Long-term shutdown reminder: Power on and run for 1 hour every half month to keep the compressor active. Do not invert during transportation. Let it stand for 72 hours before turning on the machine.

VI. Overview of Technical Parameters

Temperature range

-70℃ to +180℃(Customizable and extensible)

Humidity range

20% to 98%RH

Temperature uniformity

≤±1.5℃(no-load)

Interior material

SUS#304 mirror stainless steel (1.2mm thick)

Insulating layer

100mm rigid polyurethane + glass fiber composite structure

Refrigerant system

Tecumseh of French 2 stages compressor unit

Controller

7 Inch touch screen, supports 485 communication and USB storage

Volume

3600L (W1500*H1600*D1500mm)

Consult now: Get exclusive industry solutions and a limited-time 1.5-year extended warranty offer. Customized service: We offer personalized customization solutions for size, temperature zone, power supply, etc., and will deliver within 20 working days.

Floor-standing high low temperature humidity test chamber Price in your hand, don’t worry about your any experiments.

Keywords

Further details

 

Team Highlights

Guangzhou Jiaoguang Asia Exhibition

Guangzhou Jiaoguang Asia Exhibition

Guangzhou Jiaoguang Asia Exhibition

Guangzhou Jiaoguang Asia Exhibition

Shanghai Munich Exhibition

Shanghai Munich Exhibition

Company Qualifications

ISO
ISO
Trademark Certificate
CE
Floor-Standing High Low Temperature Humidity Test Chamber
+
  • Floor-Standing High Low Temperature Humidity Test Chamber

Floor-Standing High Low Temperature Humidity Test Chamber

Shuangyi Floor-standing high low temperature humidity test chambers are core equipment for industrial product reliability testing. By precisely simulating extreme temperature and humidity environments, they help manufacturers detect potential product defects in advance and ensure stability and durability in real environments.


Leave a Message Online

Note: Please provide your contact information, and our specialists will get in touch with you as soon as possible!

Submit Message