Floor-Standing Constant Temperature Humidity Test Chamber
+
  • Floor-Standing Constant Temperature Humidity Test Chamber

The production floor-standing constant temperature humidity test chamber adopts a split innovative structure, separating the test chamber from the refrigeration/heating core system. This significantly reduces the interference of equipment operation vibration and noise on the test environment, while also supporting personnel to enter for operation or large sample testing. Its core performance is reflected in three aspects:

The excellence of the temperature and humidity control broad range:

(1) Cover the temperature of -70℃ ~ + 150℃, humidity control range of 10% ~ 98% RH, can be simulated from the polar cold to all kinds of harsh environment of high temperature moist tropical.

(2) High precision, stable within ±0.2℃ temperature fluctuation degree, humidity, volatility is not more than ±2% RH, ensure the consistency of test conditions.

(3) Rapid response: support nonlinear heating rate (maximum 3℃/min) and the cooling rate (1℃/min), shorten the test cycle.

Overview of Core performance parameters

Parameters Classes

Technique Data

Test Conditions

Temperature range

-70℃~+150℃

Non-load

Humidity range

10%-98%RH

Temperature zone

Temperature uniformity

≤±0.5℃

Constant throughout the testing

Humidity fluctuation

±2.5%RH

RH≥75%

Heating rate

3℃/min

+25℃~+85℃

Cooling rate

1℃/min

+25℃~-40℃

 

Technological Innovation and Product Highlights

1. Humanized operation interface:

1)The intelligent control system is equipped with 7-10 inch industrial-grade touch screen, support Chinese/English bilingual switching, real-time display temperature and humidity curve and device status.

2)The remote monitoring function: through RS-485 interface or proprietary software connect computer/mobile phone APP, cross-platform data monitoring and parameter adjustment.

3)Multistage programming ability: Supports 10 groups of programs ×100 segments of programming, meeting complex alternating testing requirements (such as 24-hour cyclic wet heat testing).

2. Energy saving and environmental protection design dynamic adjustment system:

1) The refrigerant using electronic expansion valve (EEV) can realize accurate control refrigerant flow, working condition of low temperature energy saving 30%.

2) The water purification technology: built-in water filtration and recycling system, constant humidity, water consumption < 24 hours 3.6 L, reduce water consumption.

3) Efficient refrigeration components: The French Tecumseh compressor, when paired with the eco-friendly refrigerants R507a/R404a, strikes a balance between performance and environmental protection requirements.

 

3. Safe and reliable architecture seven heavy security protection:

1) Power leakage protection, over temperature, compressor overload protection, low water level alarm, humidification dry heating protection, open the door alarm.

2) Combination lock fault self-diagnosis system: Automatic recording exception code, such as power supply, sensor failure, shorten maintenance time.

3) Water and electricity separation design: Eliminate the risk of electrical short circuits caused by water leakage in the humidification system.

4. Modular and flexible customization

1) Modular flexible customization fission type structure: optional fission design, such as compressor heat source outside, reduce the heat load lab.

2) Extension interface: standard Φ50 mm cable, optional video monitoring, USB data export, more boxes from spreading system.

3) Non-standard customized service: Supports size customization (such as dedicated test chambers for automotive glass), special shelves (anti-corrosion coating), and military-grade seismic design.

Analysis of Industry Application Scenarios

1. Aerospace: Simulate the extreme space environment (-70℃ low pressure) of satellite components to verify the structural stability of the materials under temperature fluctuations.

2. New energy automobile: Test the charge and discharge performance and safety of power batteries under high temperature and high humidity (85℃/85%RH) to prevent thermal runaway.

3.Bio-Pharmaceuticals: It complies with the ICHQ1A(R2) standard and conducts the accelerated stability test of the drug (long-term test at 25°C/60%RH).

4. Consumer electronics: Evaluate the anti-oxidation performance of circuit boards of mobile phones and 5G devices in tropical rainforest environments (40°C/95%RH).

5. Research and development of new materials: Cold and hot cycling tests for photovoltaic back sheet and resin composite materials (alternating at -40°C to 110°C for 500 hours).

The core Issues that Customers care about the most

1.What basic conditions are needed for equipment installation?

(1) Site requirements: The ground level, the back/side thermal dissipation space has been reserved 60 cm or more, a positive 100 cm or more space.

(2) Power supply: 1500L with AC220V/AC110V (single phase), a large number to AC380V (three phase four wire + ground wire).

(3) Water: Recommend pure water.

2. How can we ensure the uniformity of temperature and humidity, after purchasing a floor-standing constant temperature humidity test chamber?

(1) It adopts a multi-wing centrifugal fan and a scientific air duct design, with a temperature uniformity of ≤±2C.

(2) The humidity sensor dynamic calibration technology, avoid drift caused by long-term use.

3. What safety protection measures are there for the equipment?

(1) Core protection: High and low pressure protection for the compressor, anti-dry burning for the humidifier, and dual sensor cut-off for over-temperature in the test chamber.

(2) Emergency design: Emergency exhaust button, mechanical door unlock the device.

4. Can test data be recorded and exported?

(1) It is equipped with a standard RS-232 interface and supports the optional 6-channel digital display recorder.

(2) data can be saved as Excel/PDF format, conform to the requirements of the FDA21CFRPart11 electronic records.

5.What are the key points of maintenance and upkeep?

Component

Maintenance period

Operational guideline

Humidifying water tank

Every week

Clean and disinfect to prevent the growth of microorganisms.

Condenser filter screen

Every month

Vacuum or wash with water and then dry.

Door seal

Every quarter

Apply silicone oil to prevent aging and cracking.

6. Is it supported to customize non-standard floor-standing constant temperature and humidity test chambers?

1. The whole process customization services:

(1) Size custom: Maximum support width 2*2*1.2M deep into the module.

(2) Special features: Explosion-proof design, corrosive gas test, as low as 5% RH super dry environment simulation.

Product User Guide

1. The equipment installation process

(1) location: use adjusting castor height, to ensure smooth box body.

(2) connection: according to the nameplate indicating ground connection (no zero to share!) .

(3) the water connection: water purification equipment automatically float valve outlet connected to the tank.

(4) check: boot after electrify confirmation compressor steering (reverse transfer alarm downtime).

 

2. Standard operating procedures

3. Key maintenance operations

(1) Descaling operation: Perform the water tank descaling program monthly (press the SELECT key to enter the maintenance menu).

(2) sensor calibration: It’s recommended that each year to PT100 platinum resistance calibrated by the manufacturer.

(3) the refrigerant added: when the cooling rate is lower than the nominal value of 70%, to check the system pressure.

4. Security considerations

Bring it is forbidden to test the following material:

(1) The explosive goods (type of lithium battery need explosion-proof modified) .

(2) Strong corrosive liquids (such as sulfuric acid, hydrofluoric acid) .

(3) Radioactive sample .

(4) Biological pathogens.

Operator protection requirements

(1)Into the cryogenic tank (< -20 ℃) to wear antifreeze gloves and masks.

(2)Sampling, high temperature and high humidity environment to enable the first chamber and exhaust fan.

Why choose our Shuangyi floor-standing constant temperature and humidity test chamber?

1. Technical support: Produced in accordance with the German VDI2083 standard, key components have passed the MTBF 100,000-hour certification.

2. Global service network in China (Dongguan), South Korea (Seoul), Germany (Munich) to establish a technology center, with 2 hours response service.

3. The successful case of endorsement:

(1)Customized a 1500L split-type test chamber for BYD to support continuous testing of new energy batteries throughout the year.

(2)As the Ningde era custom large floor equipment trouble-free continuous running 500 hours.

Choosing us is not just about choosing a piece of equipment, but also about choosing an environmental testing partner that covers the entire product life cycle. From custom solutions to install training, from preventive maintenance to upgrade technology, we double the equipment is committed to be your core of reliability engineering support. Immediate action, open environment testing new era!

Keywords

Further details

 

Team Highlights

Guangzhou Jiaoguang Asia Exhibition

Guangzhou Jiaoguang Asia Exhibition

Guangzhou Jiaoguang Asia Exhibition

Guangzhou Jiaoguang Asia Exhibition

Shanghai Munich Exhibition

Shanghai Munich Exhibition

Company Qualifications

ISO
ISO
Trademark Certificate
CE
Floor-Standing Constant Temperature Humidity Test Chamber
+
  • Floor-Standing Constant Temperature Humidity Test Chamber

Floor-Standing Constant Temperature Humidity Test Chamber

In the field of temperature and humidity testing applications, floor-standing constant temperature humidity test chambers are suitable for reliability tests where a large number of items to be tested can be placed simultaneously to shorten the total test time of a single product, or for temperature and humidity stress screening (ESS) of products, dynamic tests that require a large movement space, and large-sized products are all applicable to this equipment.


Leave a Message Online

Note: Please provide your contact information, and our specialists will get in touch with you as soon as possible!

Submit Message