Energy-Saving Constant Temperature Humidity Test Chamber
Energy-Saving Constant Temperature Humidity Test Chamber
Energy-Saving Constant Temperature Humidity Test Chamber
+
  • Energy-Saving Constant Temperature Humidity Test Chamber
  • Energy-Saving Constant Temperature Humidity Test Chamber
  • Energy-Saving Constant Temperature Humidity Test Chamber

Shuangyi Manufacturer's energy-saving constant temperature humidity test chamber is specially designed for high-precision environmental testing. It adopts cutting-edge frequency conversion technology and environmentally friendly refrigerants, ensuring a temperature accuracy of ±0.1℃ and a humidity stability of ±1%RH while significantly reducing energy consumption. It is applicable to product reliability verification in fields such as electronic components, new energy batteries, medicine, aerospace, etc.

Equipment features:

  1. Double-layer design: The equipment is divided into upper and lower layers, each layer independently controlling temperature and humidity, allowing for simultaneous testing under different conditions.
  2. High efficiency and energy saving: Double deck structure design to optimize the space utilization, reduce the energy consumption.
  3. Independent control system: Each floor are equipped with independent temperature and humidity control system, the mutual interference.
  4. The large capacity test space: Suitable for large sample test, improve test efficiency.
  5. Precision control: The use of advanced temperature and humidity control system, to ensure the stability and accuracy of the test conditions.

The following are its core features and technical analysis:

1.Intelligent cooling capacity distribution system

By adopting the cooling capacity demand algorithm and variable frequency compressor technology, the cooling capacity output is dynamically adjusted according to the real-time load, avoiding mutual consumption of cold and heat, and the energy-saving rate can reach over 30%.

2.Heat energy recovery design

Utilize the condensation heat in the high-temperature zone to provide auxiliary energy for dehumidification or heating in the low-temperature zone, reduce additional energy consumption (such as hot gas bypass technology), and lower the overall power consumption.

3.Static balance temperature control mechanism

Breaking through the traditional dynamic balance mode of simultaneous operation of "cooling + heating", it realizes "no heating when cooling and no cooling when heating", reducing energy waste from the source.

II. Structural Optimization Design of Easy-maintainable energy-saving constant temperature humidity test chamber

1.Vertical integration dual system model

The floor space is reduced by 40% through an upper and lower independent box structure (such as 1000×600×600mm×2). Each floor is equipped with a dedicated cooling/humidification module, supporting the synchronous operation of different test programs.

2. Enhance insulation performance

The inner tank is made of 304 stainless steel and features a double-layer polyurethane insulation layer. Combined with a sealed door design, it effectively isolates external environmental interference and reduces cold leakage.

3.Modular maintenance structure

The side-mounted inspection door and the hierarchical electrical control system facilitate quick maintenance and reduce downtime costs.

4. Comparison of product advantages

Functions

Shuangyi Manufacturer (YIPIN)

Traditional test chamber

Annual average energy consumption

18,000 kWh

30,000 kWh

Recovery time of temperature and humidity

≤3min

≥8min

Noise level

59 dB(A)

70 dB(A)

Water consumption for humidification per month

15L

40L

 

III. Performance parameter indicators

Parameters type

Typical values of energy-saving

Comparison of traditional equipment

Temperature range

-70℃ to 180℃

-40℃ to 150℃

Humidity control accuracy

±2% RH

±3% RH

Temperature uniformity

≤±2℃

≤±3℃

Heating rate

Maximum 3℃/min (programmable)

1℃~2℃/min

Power consumption (150L capacity)

It is 30% lower per hour than the traditional model.

Fiducial value

Economic benefit analysis, in 150 litre model of laboratory energy-saving constant temperature humidity test chamber for example.

1. Contrast: energy consumption per hour power saving 30%, industrial electricity price ($0.24USD/kW · h) next year province electricity about $1,142.87-$1428.57USD.

2. Maintenance costs: modular design to reduce the failure rate, maintenance frequency, to reduce more than 50%. Iteration through technology, energy-saving equipment in precision achieved a balance between environmental simulation and the sustainable development, become efficient choice in the field of industrial test.

Customer group

(1)electronic manufacturing: chip and PCB aging test.

(2)New energy enterprises: power battery high and low temperature cycle experiment.

(3)The pharmaceutical research and development, drug stability test (meet ICHQ1A).

(4)Scientific research institutions: material environment adaptability research.

Industry value

(1) Through ISO17025 calibration certification, meet the standard of GB/T2423, IEC60068 test.

(2) Help enterprises reduce their carbon footprint: annual electricity saving acuity 12000 kWh (compared to traditional model).

Core purpose

(1) The temperature and humidity cycle test, constant temperature and humidity storage, temperature shocking test (Thermal Shock).

(2) The failure analysis of accelerated aging, life product acceptance testing.

Technical breakthrough

(1) Dual frequency conversion system: frequency conversion compressor +EC fan, power consumption adaptive load.

(2) Intelligent energy-saving algorithm: dynamic adjusting cold and heat balance, avoid overshoot energy consumption.

(3) Patent humidification system: ultrasonic atomization technology, water consumption reduced by 60%.

Four product highlights

(1) 40% energy saving: Certified by TUVRheinland for energy conservation.

(2) 0 maintenance design: since the early warning and fault diagnosis system, modular parts replaced quickly.

(3) Quiet operation: 59dB or less dB (A) (1 meter distance, working condition of national standard).

(4) The safety compliance: CE/UL61010 standard, equipped with double leakage protection.

IV. The top 5 Issues That Customers Care about the Most

Problem

Solution

1.Is the electricity bill high for long-term operation?

Variable frequency technology combined with energy-saving algorithms can save approximately$2,142.87USD in electricity bills per year.

2.Insufficient uniformity of temperature and humidity?

3D air duct design, 8-point temperature and humidity uniformity verification report.

3.High maintenance cost?

Free remote diagnosis,2-year warranty for core components.

Does the equipment take up a lot of space?

Compact design (Standard model occupies less than 1.2 square meters.

V. Buy energy-saving constant temperature humidity test chamber must need instructions for Use (Simplified Version)

Three quick start installation:

1.Horizontal thermal dissipation space has been reserved a special ground connection (> 50 cm) back.

2.Operation:

2.1. Touch screen setting program: temperature curve/humidity step/cycle number.

2.2. Activate the self-check function (it takes 2 minutes).

3. Maintenance

3.1. Every month: clean screen pack (magnetic suction design).

3.2. Quarterly: Calibrate the sensor (supports automatic calibration).

▲Safety Notice: Do not test flammable and explosive substances! When fully loaded, the sample spacing should be greater than 5cm.

Keywords

Further details

 

Team Highlights

Guangzhou Jiaoguang Asia Exhibition

Guangzhou Jiaoguang Asia Exhibition

Guangzhou Jiaoguang Asia Exhibition

Guangzhou Jiaoguang Asia Exhibition

Shanghai Munich Exhibition

Shanghai Munich Exhibition

Company Qualifications

ISO
ISO
Trademark Certificate
CE
Energy-Saving Constant Temperature Humidity Test Chamber
Energy-Saving Constant Temperature Humidity Test Chamber
Energy-Saving Constant Temperature Humidity Test Chamber
+
  • Energy-Saving Constant Temperature Humidity Test Chamber
  • Energy-Saving Constant Temperature Humidity Test Chamber
  • Energy-Saving Constant Temperature Humidity Test Chamber

Energy-Saving Constant Temperature Humidity Test Chamber

he energy-saving constant temperature humidity test chamber is a device that achieves environmental simulation testing by optimizing energy utilization efficiency. It significantly reduces operating energy consumption while maintaining precise temperature and humidity control. With precise environmental simulation, it is a green laboratory solution that reduces energy consumption by 40%.


Leave a Message Online

Note: Please provide your contact information, and our specialists will get in touch with you as soon as possible!

Submit Message